The Neutron is new from Flexifoil for 2009 - A great all round package that gets you on the water with minimum fuss so you never miss a session. Arguably the best value water kite package Flexifoil have ever produced theres no doubt the Neutron is Bomb proof fun!
Features include:
Improved Dacron Cage:
The Dacron reinforcement strips run from wingtip-to-wingtip along the leading edge and down each side of the individual struts. These reinforcements have been slimmed down, so the strength is only at the high stress and wearable areas of the kite.
Leading Edge Construction:
Incredibly robust and strong, the Neutrons Leading edge tube is heavily reinforced to withstand heavy use.
Leading Edge Reinforcements:
EVA / Neoprene bumpers are sewn onto the leading edge at each point where the struts meet the leading edge. They protect the leading edge from damage whenever the kite comes into contact with the ground and significantly prolong the life of the kite.
Oversize Wingtips:
The large diameter of the leading edge wingtip struts help prevent the kite from deforming when turning. These stiff wingtips hold their shape and provide a direct and responsive feel.
Leading Edge Abrasion Resistance:
Flexifoil have attempted to maximise the ability of the kite to withstand scrapes and wear, but keep the weight and drag implications of the reinforcements to a minimum for excellent flight performance. There are tough polyester patches covering every leading edge seam that comes into contact with the beach, to protect this important stitch line and we have newly designed slim moulded strips to protect the kite’s canopy on the beach.
Improved Rigid Strut System:
The connection between the struts and the leading edge tube has been completely remodelled allowing for millimetre perfect construction, improved strength and increased rigidity in the kite frame.
Intelligent Aerofoil Design:
The seams on the Neutron are placed along geodesic paths to ensure that the load forces running through the kite during flight are directed into the right areas. Therefore the kite maintains its shape in the air leading to no loss of power transfer when initiating turns and powering up the canopy. The geodesic design helps give the Flexifoil Neutron a direct response to bar movement. The Neutron’s aerofoil is designed to provide powerful boost, good low-end performance, lots of depower and make the kite resistant to back-stalling.
Anti Flutter Battens:
Two small battens are positioned into the trailing edge near the wingtips. These are reinforced with Dacron, and create a stiffer trailing edge with clean release for turbulent air. This reduces drag and provides an increased turn speed. The battens are as small as possible to reduce weight. They are also uniform in size across the whole range.
Segmented Leading Edge:
The segmentation of the Dacron leading edge ensures a precise leading edge shape for better performance and strength. The leading edge has significant internal reinforcements sewn into its seams to improve the overall strength.
The joins of these individual segments have been covered with patches of polyester to protect them from the harsh beach environment.
Trailing Edge Battens:
Battens are sewn into the trailing edge near the wingtips. Reinforced with Dacron, they create a stiffer trailing edge and a clean release for turbulent air passing over the wingtips, this reduces drag and provides an increased turn speed. The battens have been reduced in size and are now uniform in length across the whole size range.
Uniform Pressure Design:
The strut diameters have been designed in conjunction with the leading edge diameter to ensure adequate stiffness throughout the kite. The struts and leading edge maintain a uniform pressure which gives the kite a rigid structure for maximum aerodynamic performance.
Molten Bladder Technology:
2009 sees the introduction of improved bladder welding techniques to Flexifoil water kites. The new welding process has been tested up to a sweltering 100 degrees centigrade to make sure it will stand up to extreme conditions felt in all the world’s hottest kitesurf locations.
Improved Single-Point 'E-Z' Inflation:
All the struts and the leading edge are interconnected so you can inflate the kite through one single inflation valve, making your kite quick and easy to set up and ride. Attached to the leading edge are ‘inflate’ and ‘deflate’ valves making the kite easy to set up and pack down.
Bridle Lines and Toggles:
All Neutron kites come with colour-coded lines and toggles to ensure you set your kite up correctly. The ‘toggle and loop’ line connection system makes it impossible to make the mistake of connecting the front lines to the back toggles and vice versa. The bridle attachment points have been simplified, making it easier to change your bridle if required and all the ‘high and low’ wind settings are now labelled. The bridle attachment points on the leading edge are now located further round the bottom of the leading edge, so they are protected when the kite is resting on the ground.
Improved Air Clamps:
Rounded clips seal off the air between the leading edge and struts to ensure the entire kite won’t deflate in case of a puncture. It is also possible to deflate the leading edge while keeping your struts inflated for easy kite transportation. The connecting tubes in the ‘E-Z’ system have been covered with a neoprene sock which helps to protect them. The strut valves are manufactured with a softer material which achieves a better bond with the bladders.
Improved Reinforced Strut Ends:
Rugged strut ends made with an
anti-abrasive material help protect the struts when handling the kite. These enlarged strut tips also make for an easier bladder replacement process.
Optional 5th Line Attachment:
For riders who prefer to ride using a 5th line system for added safety and self-landing, there is an optional 5th line available. The 5th line is to be used in conjunction with the bridle, not separately. The kite is supplied with the 5th-line top attachment.
Wingtip Dump Valve:
Flexifoil were the first company to introduce this feature which makes it quick to deflate and roll up the kite after a session. Open the tip valve, main valves and air clamps and then roll up the kite from one end to the other. The air is expelled in one motion and leaves the kite ready to pack away.
Color Coded Flying Lines:
All Neutron kites are supplied with colour-coded lines and toggles to ensure that mistakes are not made during set up. The ‘toggle and loop’ system means that is near impossible to make a mistake of connecting your front lines to the back toggles or vice versa. The bridle attachment points on the leading edge are now located further round the bottom of the leading edge, so they are protected when the kite is resting on the ground.
Velcro Valve Fastening:
Strong Velcro tabs keep the valves securely in place.
Available in five sizes: 3m, 5m, 7m, 9m and 12m and in four different colours.
*All kites, supplied as Kite Only, which includes pump, bag, repair kit & kite.*
Flexifoil Neutron Control Bar Sold Separately: Carbon Bar 48cm, 250kg / 20m / 4 line set, safety leash.
Let us know your colour preference when you order, by phone or e-mail
Back
Click for supersize 
Click for supersize  |
Share your experiences with members of the extreme community.
Submit your own Flexifoil Neutron review
